| •
|
When removing and installing the hood,
an assistant is necessary. |
| •
|
Be careful not to damage the hood and
body. |
| •
|
When removing the clips, use a clip
remover. | |
| 1. |
Remove the front bumper.
(Refer to the BD group – “Front Bunper”
) |
| 2. |
Loosen the mud guard mounting
screws.
|
| 3. |
After loosening the mounting screws and clips,
then remove the side sill garnish (A).
|
| 4. |
After loosening the mounting screws, then
remove the front bumper side mounting bracket (A).
|
| 5. |
Using a screwdriver, remove the fender side
cover (B). |
| 6. |
After loosening the mounting bolts, then
remove the fender (A).
|
| 7. |
Installation is the reverse of
removal | |
